Model specifications and parameters

Inner ring for the standard type of synchronous belt with the general use of H, L, 5M, 8M, 14M and other models, with the back of the different thickness of the 3-10mm color, hardness decreased properly. The utility model is mainly used for conveying or conveying articles, and can be used in the industries of conveyors, dishwashers, dryers, packaging machinery, food machinery, mining equipment, etc..

Material selection and product characteristics

With back cover material, the general use of NR, BR, SBR, NBR, CR, EPDM, HNBR, CSM, IIR, NBR+PVC, TPR, color: black, white, green, blue, yellow, red or more.
Product features to ensure that the tensile strength, high transmission accuracy, good stability, oil resistance, low noise, etc..

Related matters needing attention

1）Note that the product surface is clean, the belt should not be distorted, with teeth to be full.
2）Products in the transport, installation and other processes, no twists and turns, otherwise it will damage the skeleton material (glass fiber), the impact of the strength of the belt.
3）Products in the installation and use of the process, shall not scratch the belt, not with chemicals (especially strong oxidizing acid), try to avoid contact with oil and water for a long time, so as not to affect the life of the product.
4）When the product is replaced, the tension of the belt must be reduced to the minimum, so that it can be taken out. It is strictly prohibited to use the non professional tools to pry down under the condition of high tension.